Model VibWire-108-GPRS
VibWire-108-GPRS with integrated GPRS/GSM modem and 10000 record logger.
VibWire-108-GPRS 8 Channel unit GPRS communication only
VibWire-108-GPRS/A 8 channel unit GPRS modem & Analogue output
The analogue output version of this instrument can be connected to any data logger or acquisition system.
The instrument can act as a vibrating wire logger in the periods of inactivity before making a connection to the GPRS network and to maintain information should the instrument fail to connect.
Model VibWire-108-TRS24
VibWire-108-TRS24 with integrated 2.4 GHz spread spectrum transceiver.
VibWire-108-TRS24 2.4 GHz spread spectrum transceiver
VibWire-108-TRA24/A 2.4 GHz transceiver & analogue outputs.
The transceiver can be configured for point-to-point or mesh network data transmission. A wide range of directional antenna available to improve range. No sensor configuration since full digital data acquisition operation.
General Information
All instruments are supplied with a protective front panel and with DIN rail mounting clips enabling the instruments to be easily installed
The images below have been included to show the technical differences between the different models within the VibWire family.
Select Image to download Data sheet
Model VibWire-108
This is the most basic VibWire-108 model and only supports analogue output representation of the sensor signal. Lowest cost vibrating wire interface within the VibWire-108 range.
VibWire-108 8 x Analogue Channel output only.
All units contain the frequency readout display as standard.
Model VibWire-108-RS485
VibWire-108-RS485 with integrated RS-485 serial network port.
VibWire-108-RS485 RS485 serial comm. port
VibWire-108-RS485/A RS485 port and analogue output.
To 32 Instrument within 1 Km network range
This version of the instrument supports direct connection to a RS-485 multi-drop serial port network. Data can be read using any standard RS-485 network interface card.
Model VibWire-108-SDI12
VibWire-108-SDI12 with an integrated RS-SDI-12 serial network port.
VibWire-108-SDI12 SDI-12 serial comms. port
VibWire-108-SDI124/A SDI-12 port and analogue output.
This version of the instrument supports direct connection to a SDI-12 multi-drop serial port network. Data can be read using any data recorder supporting SDI-12 network.
Very simple to install using 2 wire serial network.