Parts List-2005 to 2006

The following table shows the parts list available for the Keynes Controls products:

NetPod 4000 Synchronised Data Acquisition System
NDACS 6000 Logger Units
ATM Data Acquisition
Geotechnical Instrumentation
Vibrating Wire Interface

General Information

The NetPod 4000 systems can be assembled using 1 - 16 individual analogue input cards. The only limitation on the
assembly of the 4000 unit is that the input modules must be of the same ADC resolution. For example any listed 24 bit
ADC card can be used with any other card within the same instrument.

Digital Interfaces

Each instrument supports from 1 - 8 digital interface card. Each interface card generally contains 2 digital I/O or Dual
polarity sensor excitation power supplies.

Data Synchronisation

All of the data acquisition and control operations for each interface is synchronised both internally within the instrument
amd exterannly for instruments across a network.

NetPod 4000 Interface cards can also be customised to suit project applications upon requirement.

NP4200-V103

DSP mother board

NP42BF-V110

Base Frame.

NP42BF-V110

Desktop cabinet

NPPIM-01

Plug-in-module Enclosure

NPFiltBat

Mains Transient Filter & Battery Backup Interface

NPGPSU-01

Power Supply

NPFAN-01

Fan

NPRCK-013

84 HP X 6U Plug In Module Frame

24 Bit ADC Analogue Input Modules - all cards contain Signal Conditioning & Anti-ailias Filters

NPAI24-V1HI

± 5V. 24 bit ADC board.

NPAI24-V2HI

± 50V. 24 bit ADC board

NPAI24-V3HI

± 500V. 24 bit ADC board

NPAI24-SC1

24 bit Current loop . 0-20 mA, 4-20mA

NPAI24-SC1-060

24 bit Current loop . 0-60 mA

NPAI24-SG1

24 bit ¼ and ½ bridge strain gauge card -Voltage Excitation

NPAI24-SG2

24 bit full bridge strain gauge card

NPAI24-SG3

24 bit full bridge strain gauge - No Excitation

NPAI24-TC-B

24 bit thermocouple type B

NPAI24-TC-C

24 bit thermocouple type C

NPAI24-TC-E

24 bit thermocouple type E

NPAI24-TC-K

24 bit thermocouple type K

NPAI24-TC-N

24 bit thermocouple type N

NPAI24-TC-R

24 bit thermocouple type R

NPAI24-TC-S

24 bit thermocouple type S

NPAI24-TC-T

24 bit thermocouple type T

NPAI24-RT1

24 bit RTD - Type A & B - Const Current card excitation 227 microA,
Used with ICP Accelerometers.

NPAI24-10VHZ

24 Bit 0 - 10V DC High Input Impedance Card with EMC Shield
100 M Ohm Powered Off & > 1 G Ohm powered on

24 Bit ADC Analogue Modules containing High Current Transorb Lightening Protection

The following sensor interfaces support Transorb lightning protection as part of the on-board signal conditioning
and are ideal solutions where sensor cabling is routed through areas at risk to strikes such as large outside metallic structures

NPAI24-V1HIT

± 5V. 24 bit ADC board.containing High Current Transorb Protection

NPAI24-V2HITZ

± 50V. 24 bit ADC board containing High Current Transorb Protection

NPAI24-V3HITZ

± 500V. 24 bit ADC board containing High Current Transorb Protection

NPAI24-SC1HZ

24 bit Current loop . 0-20 mA, 4-20mA containing High Current Transorb Protection

NPAI24-SC1-060HZ

24 bit Current loop . 0-60 mA containing High Current Transorb Protection

NPAI24-SG1HZ

24 bit ¼ and ½ bridge strain gauge card -Voltage Excitation Transorb Protection

NPAI24-SG2HZ

24 bit full bridge strain gauge card containing High Current Transorb Protection

NPAI24-SG3HZ

24 bit full bridge strain gauge - No Excitation containing High Current Transorb Protection

NPAI24-TC-BHZ

24 bit thermocouple type B containing High Current Transorb Protection

NPAI24-TC-CHZ

24 bit thermocouple type C containing High Current Transorb Protection

NPAI24-TC-EHZ

24 bit thermocouple type E containing High Current Transorb Protection

NPAI24-TC-KHZ

24 bit thermocouple type K containing High Current Transorb Protection

NPAI24-TC-NHZ

24 bit thermocouple type N containing High Current Transorb Protection

NPAI24-TC-RHZ

24 bit thermocouple type R containing High Current Transorb Protection

NPAI24-TC-SHZ

24 bit thermocouple type S containing High Current Transorb Protection

NPAI24-TC-THZ

24 bit thermocouple type T containing High Current Transorb Protection

NPAI24-RT1HZ

24 bit RTD - Type A & B - Const Current card excitation 227 microA, Transorb Protection
Interface used with ICP accelerometers

16 Bit ADC Analogue Input Modules

The following modules contains all of the same signal conditioning as the 24 bit cards however they use a 16 bit ADC
to make the analogue signal conversions.

NPAI16-V1

± 2.5V 16 bit ADC board

NPAI16-V2

± 25V 16 bit ADC board

NPAI16-V3

± 250V 16 bit ADC board

NPAI16-SC1

Current loop 16 Bit ADC 4-20mA, 0-20 mA

NPAI16-SC1-060

Current loop 16 Bit ADC 0-60 mA

NPAI16-SG1

16 bit ¼ and ½ bridge strain gauge card

NPAI16-SG2

16 bit full bridge strain gauge card

NPAI16-SG3

16 bit full bridge strain gauge -Voltage Excitation

NPAI16-TC-B

16 bit thermocouple type B

NPAI16-TC-C

16 bit thermocouple type C

NPAI16-TC-E

16 bit thermocouple type E

NPAI16-TC-K

16 bit thermocouple type K

NPAI16-TC-N

16 bit thermocouple type N

NPAI16-TC-R

16 bit thermocouple type R

NPAI16-TC-S

16 bit thermocouple type S

NPAI16-TC-T

16 bit thermocouple type T

NPAI16-RT1

16 bit RTD - Type A & B - Const Current card excitation 227 microA
Used with ICP Accelerometers

NPAI16-V1HZ

± 2.5V 16 bit ADC board containing High Current Transorb Protection

NPAI16-V2HZ

± 25V 16 bit ADC board containing High Current Transorb Protection

NPAI16-V3HZ

± 250V 16 bit ADC board containing High Current Transorb Protection

NPAI16-SC1HZ

Current loop 16 Bit ADC 4-20mA, 0-20 mA containing High Current Transorb Protection

NPAI16-SC1-060HZ

Current loop 16 Bit ADC 0-60 mA containing High Current Transorb Protection

NPAI16-SG1HZ

16 bit ¼ and ½ bridge strain gauge card containing High Current Transorb Protection

NPAI16-SG2HZ

16 bit full bridge strain gauge card containing High Current Transorb Protection

NPAI16-SG3HZ

16 bit full bridge strain gauge -Voltage Excitation containingTransorb Protection

NPAI16-TC-BHZ

16 bit thermocouple type B containing High Current Transorb Protection

NPAI16-TC-CHZ

16 bit thermocouple type C containing High Current Transorb Protection

NPAI16-TC-EHZ

16 bit thermocouple type E containing High Current Transorb Protection

NPAI16-TC-KHZ

16 bit thermocouple type K containing High Current Transorb Protection

NPAI16-TC-NHZ

16 bit thermocouple type N containing High Current Transorb Protection

NPAI16-TC-RHZ

16 bit thermocouple type R containing High Current Transorb Protection

NPAI16-TC-SHZ

16 bit thermocouple type S containing High Current Transorb Protection

NPAI16-TC-THZ

16 bit thermocouple type T containing High Current Transorb Protection

NPAI16-RT1HZ

16 bit RTD - Type A & B - Const Current card excitation 227 microA
Used with ICP Accelerometers

NDACS6008

8 Channel Data Logger & Ethernet Data Acquisition System

NDACS6008-FM

8 Channel Data Logger & Ethernet Data Acquisition System

NDACS6008-HD

8 Channel Data Logger with 8 DIGIO - 10 Million Samples/Channel (Current spec)
Uses MMC memory card data storage

NDACS6016

16 Channel Data Logger & Ethernet Data Acquisition System

NDACS6016-FM

16 Channel Data Logger & Ethernet Data Acquisition System

NDACS6016-HD

16 Channel Data Logger with 8 DIGIO - 4 Million Samples/Channel (Current spec)
Uses MMC memory card data storage

NDACS-DIORLY

NDACS Digital I/O Relay Unit

NDACS-DIGIO

NDACS Digital I/O System - expansion interface for NDACS loggers

NDACS-DIGIO-ISO

NDACS Digital Interface with Isolation

NDMUX-08

NDACS MUX Unit (8 x 4) or (16 x 2) - can be used by any Keynes logger units

Sensor Interface cards can also be customised to suit project applications upon requirement.

NDACS 60000 Series Data Loggers

NP2410-JIO

2 Channel digital input card 0 - 230V input

NP2410-JIO-50

2 Channel digital input card 0 - 50V input

NPV12D

+/- 12V DC Sensor Excitation Card - with short circuit protection

NPV5D

+/- 5V DC Sensor Excitation card - with short circuit protection

NP4212-TRK

2 Channel Triac Interface

NP4211-RLY

2 Channel Relay Interface card

NP4213-JIO

2 Channel TTL Output card

Digital I/O & Sensor Excitation Cards

Each NetPod 4000 can support 1 to 8 of any combination of the following interface modules.

Sensor Interface cards can also be customised to suit project applications upon requirement.

NPLogD16-104

16 MHz 4 channel Digital input/counter logger

NPLogF33-104

33 MHz 4 Channel Frequency input counter port

NPLogD33-104

33 MHz 4 channel Digital input/counter logger

Digital Data Recorders

NPDKIT-03

Software developers tool kit

NPDRIVER

Multi-user, Multi instrument driver

NPDIADEM

NetPod Diadem Driver

NP-DLABV23

DASYLab Multi-user driver

NP-OPCSerV104

OPC Server Package

NP-NICVIv103

National Instruments Lab-view Driver

NPSCADAProV103

Orchestrator SCADA soft-ware for NDACS series data loggers

Soon to be available Linux / Unix Drivers - Contact Keynes For Details

Software

ATM Series Instruments

KCSonetV102

Sonet Node - ATM Interface

AD2416VF

16 Channel 24 Bit ADC si-multaneously sampling 5V input analogue input board

AD2416SC

16 Channel 24 Bit ADC si-multaneously sampling strain gauge input analogue board

AD2416RTD2

16 Channel 24 Bit ADC sim-ulateously sampling RTD Temperature sensor board

AD2416THK

16 Channel 24 Bit ADC si-multaneously sampling ther-mocouple boads

SeaDAQ

8 Channel 24 bit ADC si-multaneously sampling 2 Dig In/Out ports Underwater instrument

Geotechnical Signal Conditioning

VibWire-108-TX16FM

Vibrating Wire Sensor Inter-face with 16 Channel FM Tx Option

VibWire-108-SDI12

Vibrating Wire Sensor Inter-face with SDI-12 Digital Comms Interface Option

VibWire-108-NET

Vibrating Wire Sensor Inter-face with RS485 Serial Port Option

RX256-FM

256 Channel Instrumentation Receiver Unit

Keynes Controls Tilt Meter Signal Conditioning can be fitted into any manufacturers bars. The modules offer 434 & 890 MHz operation & Analogue output for local readings

T/S-102-1M-16DAFM

1m bar including end stops with analogue output & Tx option

T/2-102-1M-16DA

1m bar including end stops with analogue output option

T/S-102-2M-16DAFM

2m bar including end stops with analogue output & FM Tx option

T/S-102-2M-16DA

2m bar including end stops with analogue output

T/S-102-3M-16DAFM

3m bar including end stops with analogue output & FM Tx option

T/S-102-3M-16DA

3m bar including end stops with analogue output