Vibrating Wire Sensor Configuration
The Vibrating Wire Sensor inputs are configured by assigning a lower starting frequency and frequency range over which the sensor operates. The ability to assign user defined operating parameters enables the VibWire-108 to operate with any manufacturers sensors.
The images below show the menu items available to configure the Vibrating Wire Sensor Inputs
Channel 0 - Frequency Range (Hz)
Channel 0 - Low Frequency Setting
Low Frequency Setting
Select “Menu In” button from “CHO.LF” menu item to obtain options below
Use the Menu Up and Down keys to move through the frequency settings.
Low Frequency Sensor Settings - All Parameters in Hz
500 600 700 800 90 1000 1200 1400 1600 1800 2000 2500 3000Hz
Frequency Range Of Sensor
Select “Menu In” button from “CHO.rA” menu item to obtain options below
Use the Menu Up and Down keys to move through the frequency settings
Frequency Range Sensor Settings - All Parameters in Hz
100 200 300 400 500 600 700 800 900 1000 Hz
For each of the Vibrating Wire sensor inputs the same configuration parameters are supplied. Simply select the
appropriate menu item and access the Frequency options as described above for Channel 0.
Channel 1
Frequency Range
Channel 2
Frequency Range
Channel 3
Frequency Range
Channel 4
Frequency Range
Channel 5
Frequency Range
Channel 7
Frequency Range
Channel 6
Frequency Range
